Nominal cross-vein | Wire cross-section in AWG | Length winded on spool | Construction of a vein | The average external diameter of the wire | Maximum cable operating voltage | Maximum load current | Conductor resistance at T = 20°C maximum + minimum | Net cable weight |
---|---|---|---|---|---|---|---|---|
0,12mm2 | AWG 26 | 200 mb | 7×0,15mm | ⌀ 1,2mm | 300 V | 1,2 A | 155/139 m Ω/m | 2,4 kg/km |
0,22mm2 | AWG 24 | 200 mb | 7×0,20mm | ⌀ 1,3mm | 300 V | 2,2 A | 89,3/80,4 m Ω/m | 3,4 kg/km |
Our single wires TLY/LIY, guarantee not only the highest global product quality and the latest technologies of workmanship taking into account environmental protection, but also provide convenience of usage and savings coming from reliability.
Thanks to the use of highest quality copper, with specifically raised pureness in our regularly twisted strands with cross-sections of 0,12mm2 and 0,22mm2 and their regularity we guarantee almost lossless transmission of sent signal or current, significant facilitation of soldered and crimped assembly, resistance to vibration and oscillation and outstanding flexibility of the wire.
Our new generation of polyvinite insulation is specially diluted to guarantee a smaller outer diameter of the wire at the same cross-section of the vein with all dielectric parameters with operating voltage of up to 300V. This allows for better planning of electrical harnesses and more efficient use of cable glands. This is possible thanks to the increased physicochemical properties of insulation, which further makes our cables perfectly cope with the surrounding conditions and aggressive chemical agents. The insulation is extremely smooth and glossy, is not emotive, does not harden and does not crumble, and allows an unprecedented operating temperature in the range of -40°C to +105°C (max +120°C). This increased thermal range also reduces installation time and significantly decreases the risk of insulation melting when making high-current soldered connections or encapsulating connections with shrink pipes.
A very wide range of insulation colors and two-color variety in the form of a marker stripe and base color, significantly save on wire marking systems, eliminate the need for markers and allow quick identification of a given wire along the entire length of the made harness, even in hard-to-reach places. The cables are supplied in sections of 200m and winded onto a fully recyclable, comfortable-to-use spool with diameter of Ø = 132mm with internal guide hole Ø = 26mm, which allows you to increase the comfort of work, ending the problem with finding the end of the wire or laborious untangling after uncontrolled expansion, and greatly accelerates and facilitates the execution of multi-wire harnesses, because it is enough to put spools with a set number of wires on one guide rod and pull them all together and, as you develop, connect them to a bundle with the appropriate tape, self-clamping bands or passing them through the corrugated conduit. We equip all our spools with test seals to help you quickly find the beginning of the wire section and pack them in a sealed cover made of transparent shrink film, which allows you to quickly find the necessary color on the shelf of the warehouse, protects insulation from oxidation, dust or dirt during storage and always guarantees the final recipient the highest quality of the cables when removed from the package.
The parameters of the wires meet the requirements of ISO 9001, ISO 14001, PN-87/E-90054 (Polish standard), VDE (German standard), BASEC (UK standard), are authorized for use on EU markets (73/23/EEC standard) and CE marked (Directive 2006/95/EC), and comply with environmental directives RoHS (Act 2002/95/EU), RoHS-2 (Act 2011/65/EU), RoHS-3 (Act 2015/863) and comply with REACH environmental requirements (Regulation 1907/2006). According to EN 60332-1-2, the cables are Eca grade, do not spread flame and are approved for usage in construction works. At each request of the Recipient, we issue a certificate of conformity free of charge.
Our single wires are universally applicable thanks to their professional design and are ideal for most manufacturing and service projects in all areas of electronics and electrical engineering. They are most oftenly used in industrial and electromedical automation, in the automotive industry, in the construction of all kinds of electronic devices from toys, alarms, beacons, arcade machines, scales or sunbeds to advanced technological lines, when making low-current power, steering, control, executive installations, data transfer, alarm control panels and many other installations. They are also oftenly used to control energy-efficient LED lighting systems, connect computer controllers with receivers, implement smart building projects, and for any service and hobby work.
With us you do not have to wait weeks for the execution of your order or order huge amounts of product. We maintain large stock, we guarantee constant availability in the warehouse of all items and provide immediate shipping!
Vega-Tronik wires are an excellent solution for any professional who values quality and convenience of use in wires. The use of these wires is simple, fast, economical and guarantees perfect reliability. For almost 30 years of activity on the market we have not yet had any dissatisfied customer or any quality complaint.